|
NOTE 1: Update 28 August 2013: If you trouble to enter code and/or if code is not accepted on Nokia Lumia 900 (AT&T), then please follow the instructions below : 1. Switch ON your phone with a non accepted simcard 2. Phone will ask you to Enter Unlock Pin 3. Input the 8 digit Unlock Code
If code is Not working:
The workaround is this: Enter the incorrect code until you run out of your ten (10) attempts. Then you'll get the *real* network unlock message, with 32 attempts. Enter the same 8-digit code you've been entering,
WARNING: Nokia phone allow ONLY three wrong attempt and phone will lock up. Kindly understand the instruction carefully before entering the code into the phone.
NOTE: If you receive an error message while performing the instructions below, STOP. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. Verify the IMEI by pressing *#06# and submit a new request.
Model: For Most Nokia (Except Fido/Rogers and Model below) 1. Insert an Authorized Sim Card and turn ON your phone. (Authorized Sim Card is the original carrier Sim Card that come with the phone) 2. Press # 3. Press * three times = P 4. Press * four times = W 5. Press * twice = + 6. Enter the Unlock Code 7. Press * twice = + 8. Press 1, then # and the display should read "SIM Restriction Off" Note: It should look similar to this: #pw+CODE+1# (CODE is the Unlock Code we send you)
Model: For Most Nokia for Fido/Rogers 1. Insert an Authorized Sim Card and turn ON your phone. (authorized Sim Card is the original carrier Sim Card that come with the phone) 2. Press # 3. Press * three times = P 4. Press * four times = W 5. Press * twice = + 6. Enter the Unlock Code 7. Press * twice = + 8. Press 7, then # and the display should read "SIM Restriction Off" Note: It should look similar to this: #pw+CODE+7# (CODE is the Unlock Code we send you)
Model: T-Mobile Lumia 710 1. Insert a T-Mobile Micro SIM Card 2. Turn on the handset 3. Click on Phone Button from the Home Page 4. Next click on the Keyboard 5. Enter in: ##782# 6. Next Click the Call Button (a box will appear to enter the PIN for unlocking) 7. Enter the 8 digit Unlock Code that was provided 8. Click on the Enter Key (device should read "PIN Accepted") Or 1. Insert a Non T-Mobile Micro SIM Card. 2. Turn on the handset. Note: the phone will display a message, "This SIM Card can only be used on specific networks. Contact you Customer Service Center for the Unlock Code. 10 attempts remaining." 3. Enter the 8 digit Unlock Code that was provided. 4. Click on the Enter Key (device should read "PIN Accepted").
Model: Nokia C3 1. Insert an Unauthorized Sim Card and turn ON your phone. 2. Phone will display SIM is restricted 3. Press OK to be able to enter the Unlock Code 4. Type: #pw+CODE+1# and press OK (Rogers / Fido use #pw+CODE+7#) Phone is unlocked! Note: It should look similar to this: #pw+CODE+1# (CODE is the Unlock Code we send you)
**NOTE: For Nokia C3 ONLY, DO NOT use * , type #PW+ directly on the keypad and Replace CODE with the Unlock Code we send you.
Cable Instruction after 3 wrong attempt or Phone locked If you are receiving "CANNOT UNDO RESTRICTION, " NOT ALLOWED", "PHONE RESTRICTIONS" message. This means your phone is hard-locked and you will have to use the following software:
Require the following: 1. An Original USB Cable for your Nokia phone (Cannot be generic USB Cable). 2. The correct USB Cable Drivers. 3. Installing the 'Nokia PC Suite' software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers. You can find it HERE 4. A small software application that you can download from HERE. 5. The Unlock Code from us.
Once you have all above requirement, follow these directions below: 1. Switch on your phone without a SIM Card. You should be prompted to 'Start Phone Without SIM Card' or similar. Click 'Accept' or 'OK'. Your phone is now in offline mode. 2. Turn off all antivirus software on your computer. 3. Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode, mass storage mode etc... stay in this screen, do not any of the options. 4. Start the SendCodeUsb application you downloaded earlier and click on the 'Read Phone Info' button. The application should display several lines of information. If it says "not found" replug your phone into the usb, and then click read phone info 5. If the application still displays 'Not Found, your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone. 6. Now make sure you check the 'Check For Fbus' checkbox. Also make sure the 'Level(1-7)' ion is set to the appropriate carrier.
For Rogers and Fido use +7 or +1 For all Telus devices use +5 or +1 For all UK devices use +1 and +7 For all T-Mobile USA devices use +1 For all AT&T devices use +1
7. Enter ONLY the numbers of the correct Unlock Code into the 'Unlock Code (15 digits)' field e.g. if your correct Unlock Code was #pw+123456789012345+1# you would enter only 123456789012345 in this field) 8. Click on the 'Send Unlock Code' button. The application should confirm that your Nokia phone is now unlocked. |